LTP MATTSTONE Sealer - Impregnating Stone Sealer (5 LITRE)

LTP MATTSTONE Sealer - Impregnating Stone Sealer (5 LITRE)

✅ Natural Finish impregnating sealer that will delicately enhance colour and texture- Protects against staining; repels water, oil and grease. ✅ Suitable for internal and external use. Coverage: Low porosity floors; approx. 1-2 litres per 10m of floor High porosity floors; approx. 3-4 litres per 10m of floor ✅ For use on travertine, stone, sandstone, slate, marble, terracotta, quarry tiles, brick and paving ✅ Allows surfaces to breathe. Provides a natural, matt finish and enhances the colour and texture of the tile ✅ Dries with minimal change to the natural appearance
£96.06
57 G

JB WELD 8237UK JB8237 Plastic Weld Fast-Setting Off White Multi Purpose Reinforced Epoxy Putty, 57 G

FAST SETTING Provides a fast repair by setting in just 5 minutes. HIGH STRENGTH Exceptionally high strength provides a hard permanent repair to almost anything. MULTIPLE MATERIALS - Perfect for use on hard plastics, ABS, Fiberglass, PVC, Glass, Vinyl and other composites. ENVIRONMENTAL RESISTANCE - Resistant to water, chemicals and heat. Bonding Strength 3900PSI Set Time 25 Minutes Cure Time Cure 3 Hour Colour When Dry Off White Size 57g
£7.26
Araldite® Rapid 15ml x 2 Tubes Epoxy

Araldite Rapid 15ml x 2 Tubes Epoxy

FAST SETTING EPOXY RESIN GLUE; A solvent-free epoxy resin and hardener that acts as a quickset glue, ideal for durable bonding and repairs; Perfect for your ceramic repair kit, craft resin kits, or any complicated jobs requiring adjustments MULTI-SURFACE RESIN EPOXY; Made to create the strongest of bonds, this quickset epoxy glue is suitable for most materials including metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics TOUGH EPOXY ADHESIVE GLUE; This 2 part epoxy resin kit creates a durable bond with rapid glue that can withstand high temperatures (-30°C to 65°C), rough handling, and can be sanded & painted after 2 hours; Do not use as rear view mirror adhesive EASY TO USE; Clean and dry both surfaces, thoroughly mix equal parts of the 2 part epoxy glue for 30 seconds, apply to both surfaces, and apply light pressure; Remove excess adhesive once partially set; For optimal bonding, slightly roughen surface the superglue resin set of 2 tubes in a dry place at room temperature
£8.59
Gilding Adhesive

Gilding Adhesive, 50ml Epoxy Resin Water-Based Gold Leaf Glue for Professional Craft Use and 50ml Varnish for Protecting the

Application of Glue: Ready-to-use, water-based paste for applying gold leaf and flakes or mirror effect leaves. Appropriate for most smooth surfaces, including paper, cardboard, plastic and wood Application of Varnish: Varnish is widely applied to the surface of gold leaf and silver leaf, or applied to gold leaf ceiling or handicrafts Usage of Glue: Mixed with 10% water, mix well, brush on surface, wait for 45mins, the metal leaf can be pasted when the surface become dry and strong viscosity Usage of Varnish: Mix it with water at a ratio of 1:10 and stir well, and then evenly spread the protective oil on the surface of the gold or silver foil to prevent oxidation and scratching Coverage(1 layer): Usually 50ml gilding glue can cover 8sq ft, 50ml varnish can cover 9 sq ft
£12.01